TECHNICAL DATA
Specifications
| Specification | GSI-R16XE |
|---|---|
| Gas Type | LPG |
| Rated Gas Pressure | 28 mbar |
| Exhaust Mode | Force Flue |
| Ignition Mode | Integrated Auto |
| Rated Gas Input | 30 kWhr |
| Rated Hot Water | 16 L/min @25°C rise |
| Operating Water Pressure | 0.2 – 10 bar |
| Connections (Water IN/OUT / Gas IN) | G¾ pipe |
| Rated Voltage | AC 220-240V ~50 Hz |
| Rated Electric Power | 30 W |
| Flue Diameter | Ø60 mm |
| External Dimensions (mm) | 365 × 590 × 176 |
| Net Weight | 10.6 kg |
| Warranty | 1 Year |
GSI-R16XE
- Gas Type
- LPG
- Rated Gas Pressure
- 28 mbar
- Exhaust Mode
- Force Flue
- Ignition Mode
- Integrated Auto
- Rated Gas Input
- 30 kWhr
- Rated Hot Water
- 16 L/min @25°C rise
- Operating Water Pressure
- 0.2 – 10 bar
- Connections (Water IN/OUT / Gas IN)
- G¾ pipe
- Rated Voltage
- AC 220-240V ~50 Hz
- Rated Electric Power
- 30 W
- Flue Diameter
- Ø60 mm
- External Dimensions (mm)
- 365 × 590 × 176
- Net Weight
- 10.6 kg
- Warranty
- 1 Year
All specifications are for LPG operation. Data is subject to change without prior notice.
FAQ
Frequently asked questions
The GSI-R16XE is a 16-litre residential indoor gas water heater from GreenSeed®. It supplies up to 16 L/min of hot water at a 25 °C rise, runs on LPG or natural gas, and keeps a constant temperature from 35 to 65 °C.
GreenSeed® is a Malaysian pioneer in intelligent water heating, delivering gas water heating solutions since 2012.
Yes. The GreenSeed® GSI-R16XE is approved by Suruhanjaya Tenaga (Energy Commission Malaysia), so it meets Malaysia’s safety requirements for gas appliances.
The GSI-R16XE supplies up to 16 litres of hot water per minute at a 25 °C temperature rise, which is enough for a household shower and other everyday hot water needs.
Yes. It starts at water pressure as low as 0.02 MPa (about 3 L/min flow), so it suits low-pressure residential areas.
Both. It works with LPG at 28 mbar or natural gas at 20 mbar.
Yes. It has flameout protection, dual gas valve protection, flue over-pressure protection, forced ventilation before ignition and over-temperature protection.
No. The unit’s safety label says not to install it in a bathroom. It should be installed indoors by a qualified installer, with a properly vented flue.
A 1-year original manufacturer’s warranty for domestic use.







