Product Category

Commercial & Industrial Solutions

High-volume systems for hotels, factories, hospitals and large facilities.

Commercial & Industrial Gas Water Heater Malaysia - Outdoor

GREENSEED® Commercial & Industrial Gas Water Heater Malaysia Malaysia’s Pioneering Gas Water Heater Specialist | Engineered Hot Water Solutions Since 2012 The GreenSeed GSE-G37XE is a 37-litre heavy-duty continuous-flow gas water heater for commercial use. It delivers up to 37 litres of hot water per minute at a 20 °C temperature rise, from a maximum gas input of 60 kW. Because it heats water only as it flows, it never runs out and burns gas only while a tap is open. It runs on LPG or natural gas (NG), with an adjustable temperature of 35–65 °C on a digital LED display. Multi-safe protection includes flame-out, anti-dry-burn and anti-overheat devices. That makes it a reliable choice for commercial laundries, factories, hospitals and food & beverage businesses. It is certified by Suruhanjaya Tenaga (Energy Commission) and MyHIJAU Why choose the GSE-G37XE 37 L/min continuous flow: hot water that never runs out, built for high-volume demand 60 kW gas input: fast recovery for back-to-back use, with no cold gaps No storage tank: direct mains feed saves space and avoids standby heat loss LPG or natural gas: suits either gas supply (28 / 20 mbar) Digital control: LED display shows water temperature and error codes; set 35–65 °C with the up and down keys Smart app control (optional add-on): set temperature and power from your phone IPX4 waterproof electronics: splash protection for wet plant areas Compact wall mounting: 566 × 373 × 255.5 mm and 21.5 kg Multi-safe protection Flame-out protection: gas cuts off if the flame goes out Anti-dry-burn: won’t fire without water Anti-overheat: shuts down at unsafe temperatures Water-flow stabiliser: steady temperature as flow changes Firebox damage protection: guards the combustion chamber

View Details

Gas

GREENSEED®

Commercial & Industrial Gas Water Heater Malaysia - Indoor

GREENSEED® Commercial & Industrial Gas Water Heater Malaysia Malaysia’s Pioneering Gas Water Heater Specialist | Engineered Hot Water Solutions Since 2012 The GreenSeed GSI-G37XE is a 37-litre heavy-duty continuous-flow gas water heater for commercial use. It delivers up to 37 litres of hot water per minute at a 20 °C temperature rise, from a maximum gas input of 60 kW. Because it heats water only as it flows, it never runs out and burns gas only while a tap is open. It runs on LPG or natural gas (NG), with an adjustable temperature of 35–65 °C on a digital LED display. Multi-safe protection includes flame-out, anti-dry-burn and anti-overheat devices. That makes it a reliable choice for commercial laundries, factories, hospitals and food & beverage businesses. It is certified by Suruhanjaya Tenaga (Energy Commission) and MyHIJAU. Why choose the GSI-G37XE 37 L/min continuous flow: hot water that never runs out, built for high-volume demand 60 kW gas input: fast recovery for back-to-back use, with no cold gaps No storage tank: direct mains feed saves space and avoids standby heat loss LPG or natural gas: suits either gas supply (28 / 20 mbar) Digital control: LED display shows water temperature and error codes; set 35–65 °C with the up and down keys Smart app control (optional add-on): set temperature and power from your phone IPX4 waterproof electronics: splash protection for wet plant areas Compact wall mounting: 566 × 373 × 255.5 mm and 21.5 kg Multi-safe protection Flame-out protection: gas cuts off if the flame goes out Anti-dry-burn: won’t fire without water Anti-overheat: shuts down at unsafe temperatures Water-flow stabiliser: steady temperature as flow changes Firebox damage protection: guards the combustion chamber GREENSEED® Pioneering Gas Water Heating Technology. Powering Businesses Since 2012.

View Details

Steam

GREENSEED®

Steam Generator

GREENSEED® Intelligent Steam Generator Malaysia Pioneering Advanced Industrial & Commercial Steam Generation Technology The GreenSeed® BRAVO is a fully condensing, ultra-low-NOx gas steam generator for industrial and commercial steam, in 500 kg/h and 1000 kg/h models. Premix combustion and a 316 stainless steel condenser recover flue-gas heat that conventional boilers lose, reaching up to 101% thermal efficiency (net calorific value). That can cut fuel use by up to about 12% versus a conventional boiler. NOx emissions stay below 20 mg/Nm³. BRAVO delivers 98%-dry steam at 0.8 MPa, needs no boiler room, and arrives as a pre-tested whole unit for fast commissioning. It runs on natural gas or LPG, is CE certified, and is the first in Malaysia approved by JKKP. Why choose the GreenSeed® BRAVO Up to 101% thermal efficiency: a fully condensing design reclaims flue-gas heat Ultra-low NOx: under 20 mg/Nm³ from premix combustion, so it’s clean and compliant Up to about 12% lower fuel use than a conventional gas boiler No boiler room required: install it where steam is needed and cut infrastructure costs Compact footprint: up to two-thirds smaller than fire-tube boilers Rapid commissioning: pre-tested and fully documented whole-unit delivery 20–100% proportional turndown: matches steam output to demand 316 stainless steel condenser and boiler fins for a long service life How the GreenSeed® BRAVO works Premix combustion: gas and air are fully pre-mixed for a clean, complete burn. Steam generation: the boiler body delivers 98%-dry steam on demand. Heat recovery: the condenser cools flue gas below 60 °C and uses that heat to pre-heat the feed water, for up to 101% thermal efficiency. Key components EBM blower (Germany): efficient, quiet air supply at every firing rate FASCO · AMETEK blower (USA): variable-speed fan motor rated for 200,000 start/stop cycles Honeywell gas valve bank (USA): precise gas metering for clean, low-NOx combustion Siemens fuel gas valve (Germany): proportional gas control with high-pressure safety protection Venturi mixer and SUS 304 air filter: even air/fuel mixing and a long-life, easy-to-replace intake filter Safety protection Low-water, over-temperature, over-pressure, high flue-gas temperature and low gas pressure protection, plus a mechanical emergency stop. Applications Industries: process heat and wash-down steam Factories: high-throughput plant supply Food & beverage: cooking, sanitising and CIP Hotels & resorts: laundry and guest hot water Hospitals: sterilisation and clinical use Commercial laundry: back-to-back cycles GREENSEED® Pioneering Intelligent Steam Generation Solutions Since 2012.

View Details

Storage

GREENSEED®

HYDROtank SUS 304 Stainless Hot Water Storage Tank

HYDROtank by GreenSeed is a commercial hot water storage tank made from SUS 304 food-grade stainless steel, available in 300, 500 and 1000 litres. It is rated to 0.7 MPa for mains-fed systems and takes one to four 3 kW immersion elements (up to 12 kW), heating water to a maximum of 82 °C. With multiple ports for heating elements, coils, sensors and a T/P safety valve, HYDROtank fits easily into hotel, hospital, factory, laundry and food-service plant rooms. It is CE certified and comes with a 5-year tank leakage warranty. Why choose HYDROtank SUS 304 stainless steel: food-grade and corrosion-resistant, built for a long service life 0.7 MPa rated pressure: suits demanding mains-fed installations Up to 1000 litres: a large reserve that handles heavy, back-to-back demand Scalable electric heating: fit 1 to 4 × 3 kW elements; more elements mean much shorter heat-up times Multi-port design: 4 heating element ports, 2 temperature sensor ports, anode, drain and T/P valve ports Low upkeep: durable stainless build CE certified: manufactured and tested to international safety standards Applications Industries: process and wash-down hot water Factories: high-throughput plant supply Food & beverage: kitchens, sanitising and CIP Hotels & resorts: guest showers at peak load Hospitals: reliable clinical hot water Commercial laundry: back-to-back hot cycles CTA: Contact an authorised GreenSeed dealer for sizing, a quotation and installation support.

View Details

System

GREENSEED®

TANK+ System

GreenSeed® TANK+ (by GStech) is a premium commercial hot water system that combines manifolded continuous-flow gas water heaters with a 500-litre storage tank. The heaters supply hot water on demand, and the tank holds a reserve for peak times when many outlets draw at once. TANK+ delivers up to 86 litres per minute at a 35 °C rise, with recovery of up to 5,040 litres per hour, all at full mains pressure. It runs on natural gas (NG) or LPG. Each system arrives pre-assembled on a skid or wall frame with the GreenSeed® theBRAIN controller and primary pump, ready for fast on-site connection. Why choose GreenSeed® TANK+ Faster installation: delivered pre-assembled on a single skid or wall frame High recovery: up to 5,040 L/hr at a 35 °C rise Mains-pressure performance: full-pressure delivery, with no gravity storage Reduced footprint: the compact manifold and tank fit tight plant rooms Hot backup: manifolded heaters stage automatically, so if one unit is offline the others keep supplying hot water NG or LPG: one platform for natural gas or LPG supply theBRAIN smart controller Every TANK+ comes with theBRAIN, GreenSeed®’s in-house PLC controller. It shows system information and controls the heaters for a wide range of water-heating applications. theBRAIN is BMS-ready over the MODBUS protocol, so TANK+ connects directly to your building management system for monitoring and scheduling. Scalable from 2 to 30 heaters TANK+ scales from 2 to 30 continuous gas water heaters with 1 to 10 storage tanks, in wall, floor or back-to-back mounting. Every model is available as Internal (I) or External (E). GREENSEED® Pioneering Smart Continuous-Flow Hot Water Solutions Since 2012

View Details

System

GREENSEED®

COMM+ System

GREENSEED® Pioneering Intelligent Commercial Hot Water Solutions Since 2012 GreenSeed® COMM+ (by GStech) is a premium tankless commercial hot water system that links two to five continuous-flow gas water heaters on one pre-assembled manifold. Its Advanced Integrated Manifolded system (AIMs) and mass-flow pump technology balance hot and cold water pressure. That gives full mains-pressure hot water without storage tanks, for a smaller plant footprint and higher plant efficiency. COMM+ delivers up to 108 litres per minute at a 35 °C rise. It fires only as many heaters as demand needs, with automatic hot backup built in. It runs on natural gas (NG) or LPG, is CE certified, and suits both dead-leg and recirculation systems Why choose GreenSeed® COMM+ No storage tanks: a smaller plant footprint and no tank to maintain Mains-pressure performance: full pressure delivery without tanks Mass-flow technology: balances hot and cold water pressure for stable delivery AIMs manifold: links every unit and fires each one on demand Hot backup: built-in redundancy keeps hot water running if one unit is offline NG or LPG: available for natural gas or LPG supply Fast installation: delivered as a single pre-assembled skid or wall unit Applications Rubber glove factories: high-volume process hot water Process industry: wash-down and processing Food & beverage: kitchens, sanitising and CIP Hotels & resorts: guest showers at peak load Commercial laundry: back-to-back hot cycles Hospitals: reliable clinical hot water

View Details

Heat Pump

GREENSEED®

Air Source Heat Pump

GREENSEED® Pioneering Intelligent Water Heating Solutions Since 2012 The GreenSeed® DELTAlite is an air source heat pump water heater that extracts free heat from the surrounding air and moves it into your water. Properly installed, it delivers three to five times more heat energy than the electricity it consumes, which cuts running costs and CO₂ emissions compared with electric, gas, diesel or coal heating. DELTAlite comes in two sizes, 4–10 kW and 10–20 kW, with a COP of 4 to 4.5, water temperatures up to 70 °C, and an operating range of −7 to 43 °C. Built with a German-designed internal structure, a GMCC compressor and a digital colour touch screen, it runs ultra-quietly in homes and commercial buildings alike. Why choose the GreenSeed® DELTAlite 3–5× more heat than the electricity it uses: heat is taken from the air, not generated High COP: 4 to 4.5 across the range, higher than first-class energy rating levels Low operating cost: far cheaper to run than conventional electric, gas, diesel or coal heating Ultra-quiet operation: an improved evaporator air-flow design keeps noise down in commercial buildings Wide application: works in ambient temperatures from −7 to 43 °C German design: a renewed, optimised internal structure Smart control: multi-function controller with a digital colour touch screen Benefits of a heat pump Lower energy bills, especially when replacing conventional electric heating Lower running costs and CO₂ emissions No fuel deliveries needed Minimal maintenance required Helps achieve renewable energy targets Fully scalable: works on its own or with other systems Potential government incentives

View Details

Heat Pump

GREENSEED®

Water Source Heat Pump

GREENSEED® Pioneering Intelligent Water Heating Solutions Since 2012 The GreenSeed® DELTAmax is a commercial water source heat pump that produces hot water up to 80 °C and free cooling at the same time. It extracts heat from a water source, such as a chiller loop, cooling tower or body of water, and upgrades it to high-temperature hot water. The cooled water on the other side becomes free chilled water for your building. DELTAmax comes in three sizes, from 33.6 kW to 134.2 kW of heating with 25.5 to 101.9 kW of cooling, at a COP of 4.24 (heating to 55 °C). It uses Copeland ZW scroll compressors and lower-GWP R134a refrigerant. Because it doesn’t depend on outdoor air, it runs reliably all year round. Why choose the GreenSeed® DELTAmax Hot water plus free cooling: one unit delivers both, for a higher return on investment High COP of 4.24: efficient heat transfer means strong energy savings Up to 80 °C outlet water: high-temperature hot water for demanding uses Environmentally friendly: lower-GWP R134a refrigerant, with zero direct air-pollution emissions Reliable all year: not affected by ambient air temperature Works with existing systems: pairs with existing water chillers and cooling towers Compact, flexible installation: multi-connected heat exchangers fit a range of plant rooms Low maintenance: quiet, unobtrusive operation How a water source heat pump works A water source heat pump works on the same principle as an air source heat pump, but it draws heat from water instead of air. Water from a source circulates through the evaporator, where the refrigerant absorbs its heat. The compressor then raises that heat to a high temperature in the condenser to make hot water. The water leaving the evaporator is cooled, so it can supply free cooling. The water source must be consistent and sufficient throughout the year.

View Details

System

GREENSEED®

RecoveryPLUS

GREENSEED® Pioneering Intelligent Water Heating Solutions Since 2012 GreenSeed® RECOVER+ is a waste heat recovery unit that captures the heat now lost up the exhaust of gas-fired flatwork ironers, boilers and steam generators, and uses it to pre-heat water. Hot exhaust passes through a 316L stainless steel finned-tube counterflow heat exchanger. The cold water picks up that heat and goes on to TANK+ or the boiler feed, so they burn less fuel. A reference unit is rated at about 60 kW. theBRAIN controller measures every kWh it recovers. GreenSeed® funds, installs and maintains the unit at zero upfront cost, and is paid only on the heat actually measured. RECOVER+ is currently a pilot product, and pilot sites are open. How RECOVER+ works Exhaust in: hot exhaust from an ironer vent or a boiler flue enters the unit. Heat reclaim: the exhaust flows through a finned-tube counterflow exchanger against cold water. The coldest water meets the already-cooled air, so heat is still recovered at the very end. Pre-heated water out: the warmed water goes on to TANK+ or the boiler feed. Moisture in the exhaust condenses at the cold end and drains away. One core, two heat sources Ironer exhaust: humid air at around 100–110 °C, rich in latent heat, with condensate close to neutral. Boiler and steam-generator flue: dry, hot gas at around 200–260 °C, mostly sensible heat, with acidic condensate. That’s why the whole core is 316L stainless steel. Both streams can be recovered in series on one site. Built to cope 316L stainless steel tubes, fins and flanges Lint filter for the ironer vent Condensate drain at the base Handles acidic boiler-flue condensate Design temperature up to 260 °C Mounted on top of the flatwork ironer on adjustable green steel legs Range FG-50: one core, about 50 kW class. For an ironer vent or a boiler flue. FG-100: two cores in parallel on a balanced manifold, for larger boiler exhaust. The range scales by core count, and the final rating is confirmed per site. theBRAIN: every kWh counted Reads four temperatures and the water flow Works out live kW: flow × 4.186 × (T out − T in) Totals cumulative kWh, RM saved, CO₂ and payback Remote dashboard for you and for GreenSeed® Tamper-evident, so the numbers can be trusted The deal: zero upfront cost GreenSeed® funds, installs and maintains RECOVER+. In return, we share in the value of the heat it reclaims. That share isn’t tied to years or a fixed price. It’s tied to the cumulative kWh actually reclaimed, and it falls as the total grows. If you want out, you buy out the balance not yet reclaimed. H2: Who it is for Plants with a gas-fired flatwork ironer, or a boiler or steam generator, and hot water use close by, such as commercial laundries, hotels, hospitals and factories. RECOVER+ pairs with GreenSeed® TANK+ and BRAVO

View Details

Other categories

Let's talk about your project

Tell us about your building and operating profile, and our engineers will size the right system around it.

Talk To Our Engineers